208 L | 60 L | 5 L| 1.5 L
AntiFreeze & Coolant WG12+ Concentrate - is a concentrate based on 1.2-ethanediole (mono-ethylene glycol), radiator protection and heat exchanger agent for operation both, summer and winter with permanent frost and rust protection (for all-season use).
AntiFreeze & Coolant WG12+ Concentrate - has been developed with high quality corrosion additives for motor and cooling system, and meets the current standard in the developement of engine-building.
AntiFreeze & Coolant WG12+ Concentrate - is free of nitrides, amines, phosphates and silicate. Contains a fluorescent dye to detect antifreeze leaks with UV light.
Specifications
WG12+
Meets the requirements of
ASTM D3306 / D4985,
SAE J1034, AFNOR NF R 15-601, BS 6580,
VW TL 774-D/F (G12+),
FORD WSS M97B44-D,
GM/Opel 6277 M, GM B0401065,
Mitsubishi 0103044,
Toyota 00272-1LLAC,
Volvo, MTU MTL 5048
MAN 324 SNF (bei Verwendung
mit schwarzen Kühlmittelschläuchen, nicht für Silikon Kühlmittelschläuche - blaue Farbe),
MB 325.3, PORSCHE
Characteristics
Usage
WOLVER AntiFreeze WG12+ Concentrate is excellently suitable for motors being made of cast iron, aluminium or of a combination of both the metals and at cooling systems being made of aluminium or copper alloyage.
WOLVER AntiFreeze WG12+ Concentrate is especially recommended for light run motors where a special aluminium protection at higher temperatures is required.
Recommended working concentration 50 % WOLVER AntiFreeze WG12+ Concentrate and 50% water, radiator protection up to -37 °C can be achieved. Antifreeze protection down to -68°C is possible with a maximum of 69% WOLVER AntiFreeze WG12+ Concentrate and 31% water.
Use-duration:
Commercial vehicles to 500.000 km (ca. 8.000 hours)
Passenger cars to 250.000 km (ca. 2.000 hours)
Stationary engines to 32.000 hours (or 5 years)
It is recommended, the coolant of radiators , to change all 5 years at the earliest, or if necessary with the achievement of the named stand-times.
Miscibility
WOLVER AntiFreeze WG12+ Concentrate can be mixed with the most of the coolants based on ethylene glycol.
To achieve an optimal corrosion protection and to avoid sludge formation it is recommended to use pure WOLVER AntiFreeze WG12+ Concentrate. For the preparation of mixtures softened water should be preferred.
Data table
PROPERTIES | UNIT | TYPICAL INDICATORS |
---|---|---|
Relative density at 15.6 °C | kg/m³ | 1119 |
pH value 50% vol aqueous solution | - | 8.7 |
Freezing point 50% vol aqueous solution | °C | -38 |
Colour | - | red |