Wolver Super Fluid ATF 6000

Description
Packaging

208 L | 20 L | 1 L


Wolver ATF 6000 - the newest fluid for automatic transmissions based on HC base oils and high-performance additives. The unique composition of the oil provides extended service intervals, excellent resistance to wear and oxidation, efficient operation at the lowest temperatures.

Wolver ATF 6000 - recommended for use in modern stepped automatic boxes and hydraulic mechanisms for controlling cars, minibuses and trucks.

The performance of Wolver ATF 6000 covers the requirements of ATF DEXRON IID / DEXRON III F/G/H. Applied base oils and additive packages ensure reliable operation throughout the life of the operation (follow the operating instructions of the equipment manufacturer).

Specifications
GM DEXRON VI,
DEXRON IID/DEXRON III F/G/H

Meets the requirements of
Ford Mercon LV,
Mercon WSS-M2C138 / CJ/166-H922-A1/924-A
Toyota T III/IV, DII/D III,
Allison C-4,
MB 236.1, 236.5, 236.7,
236.8, 236.9, 236.41,
JWS 314/9683/3309/3324,
Nissan Matic C/D/J/K/S
KIA/Hyundai SP-II/ SP-III/ SP- IV/ SP- IVM/ SP- IVRR,
ETL 7045 / 7045E / 8072B /LA 2634 / Mini Cooper T- IV
ATF 5AT/ ATF HP, VW/ VAG G 055-025, G 052-162


Properties:

  • Extreme wear resistance;
  • High resistance to oxidation;
  • Improved friction characteristics;
  • Excellent low temperature properties, down to -43 ° C;
  • Prevents foaming;
  • High ability to withstand loads;
  • Neutral with respect to sealing materials.

Efficiency:

  • Provides fuel economy;
  • Increases the service life and power of the transmission mechanism;
  • Exceptionally reliable operation under extreme conditions;
  • Good operability at low temperatures;
  • Stability of viscosity also at high loads at high temperatures;
  • Year-round use;

Application:

  • Automatic transmissions of vehicles according to the recommendations of the machinery manufacturers;
  • Vehicles with manual gearbox as recommended by the manufacturer;
  • For power steering as recommended by the manufacturer;

Not intended for use in DCT/DSG or CVT transmissions and where an oil with Ford Type F/G specifications is prescribed.

Waste management:

Wolver ATF 6000 waste oil is classified as Category 2 waste and must be disposed of in designated areas.

Compatibility:

Wolver ATF 6000 is compatible with comparable oils and can be mixed with any of them. In order to take full advantage of Wolver ATF 6000, it is recommended to use it without mixing. 

Data table

PROPERTIES UNIT TYPICAL INDICATORS
Specific weight at 15°C kg/m³  843
Viscosity at 40°C cSt 29
Viscosity at 100°C cSt 6
Viscosity index   157
Flash point COC °C  204
Pour point °C  -43
Color   Red

Attention: Service instructions should be observed!
Wolver is a registered trademark of Wolver Lab GmbH
Cologne, Germany