Wolver ProTec 0W-30

Description

Packaging

208 L | 60 L | 20 L | 5 L | 4 L | 1 L

WOLVER ProTec С2 SAE 0W-30 is a fully synthetic low-viscosity engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. Provides a safe layer of lubrication at high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running. It is optimally coordinated for prolonged drain intervals.

WOLVER ProTec C2 SAE 0W-30 is especially suitable for use in automobile gasoline and diesel engines with subsequent exhaust treatment systems (DPF), which require engine oils with ACEA C2 specification, according to the OEM manual.

Specifications:
SAE 0W-30
API SN/CF
ACEA C2

Meets the requirements of:
FIAT 9.55535-DS1
FIAT 9.55535-GS1
PSA B71 2290
PSA B71 2312
MB 229.61
BMW LONGLIFE-12 FE
CHRYSLER MS-13340
IVECO 18-1811 CLASSE SC1 LV
JAGUAR LAND ROVER STJLR.03.5007

Characteristics

Extreme wear protection at all operating conditions
Excellent viscosity-temperature behaviour
Minimum loss through friction, more power for the engine
Very high cleaning capability
Low volatilization loss
High oxidation and temperature stability
Maximum shear stability

Effects

Reduces fuel consumption and exhaust emission
Formulation for less fuel consumption and Low Ash
Excellent cold start behaviour - fast supply of all lubrication points, especially of the hydraulic valve tappet
Stable oil pressure
Perfect and long lasting engine cleanliness
Prevents motor from incrustation
High performance reserves and high product stability, even at longest oil change intervals
All-year operation

Utilization

High-performance and normal four-stroke petrol engines
with multivalve technology
with Valvetronic
with catalyst technology
Passenger car diesel engines
with multivalve-technology
with turbo charging
with CDi-technology
with diesel particle systems(DPF)
with catalyst technology
This engine oil may only be used in engines that explicitly allow products to ACEA A5/B5.

Disposal

WOLVER ProTec SAE 0W30 is assigned to category 2 of used oils and thus is free for disposal.

Miscibility

WOLVER ProTec SAE 0W30 is fully compatible to custumary HD oils and can be mixed without any doubts. However, to take full advantage of WOLVER ProTec SAE 0W30 it is recommendable to use only WOLVER ProTec SAE 0W30 when refilling.

Data table

PROPERTIES	UNIT	TYPICAL INDICATORS
Specific weight at 15°C	kg/m³	853
Viscosity at -30°C	cP	4200
Viscosity at 40°C	cSt	53,3
Viscosity at 100°C	cSt	9,66
Viscosity index		168
Flash point COC	°C	220
Pour point	°C	-45
TBN	mgKOH/g	10,1
Sulphate ashes	%	0,71

Attention: Service instructions should be observed!
Wolver is a registered trademark of Wolver Lab GmbH
Cologne, Germany